Tel: +44 (0)1494 484844               Email  sales@drawntube.com

Precision Tube Production - Alloys

We manufacture Cold Drawn Tubes to your requirements

Contact our sales team on Tel: +44 (0)1494 484844 Email  sales@drawntube.com
We specialise in small quantity and quick delivery.  

Drawn Nickel Alloy tube,

Welded and drawn Nickel Alloy tube,

Alloys
Alloy K, Kovar (Nilo K ®) Seamless Tube - Specifications UNS K94610, Ni 29, Co 17, Fe.

Weight % Nilo K® Tube
Ni 29
Fe 53.0
Co 17.0
C 0.04 max
Mn 0.50 max
Si 0.20
Al 0.10 max
Cr 0.20 max
Mg 0.10 max
Zr 0.10 max
Ti 0.10 max
Cu 0.20 max
Mo 0.20 max

Availability
Alloy K, Kovar (Nilo K ®) is available in Drawn Tube. Nickel Alloy 48 tube is available in many sizes from stock, however there is a minimum production of 30m.

Alloy K, Kovar (Nilo K ®) Precision Seamless Tube is available the following size ranges.
Outside Diameter - 0.25mm (0.010") up to 16.00mm (0.625")
Wall - 0.05mm (0.002") up to 1.00mm (0.040")
Straight Lengths - 1.00mm (0.040") up to 5000.00mm (197")
Coils Lengths - 5 Metres to 15 Metres
Standard Tolerance- OD &ID +/-0.03mm (0.0012")
Wall +/- 10%
Tight Tolerance - OD&ID +/- 0.015mm (0.0006")
Wall +/-3%
Some thin wall tubes up to 25.40 mm (1.000") can be supplied.

Where specific properties or dimensions are required by a customer our technical and quality departments are available to define and produce suitable standards within exiting BS specifications. Contact our sales team on Tel: +44 (0)1494 484844  Email  sales@drawntube.com

CONTACT OUR SALES TEAM TODAY ON Tel: +44 (0)1494 484844  Email  sales@drawntube.com

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included here should be used as a guideline only. All specifications are subject to change without notice

Site Sponsored by AircraftmaterialsUK.com Ltd

Aluminium Seamless Tube - Aluminium Drawn Tube - Aluminium Precision Tube - Aluminium Aerospace Tube