Precision Tube Production - Alloys

We manufacture our products to your requirements so contact our sales team on 01844 463103 or email sales@drawntube.com. We specialise in small quantity and quick delivery.  

Alloys
Nickel Alloy 75 Seamless Tube (Nimonic 75®) - Specifications UNS N06075,
Ni, Cr19.5, Fe4, Ti0.4, BS HR 403, DIN 17751, AECMA PrEN2294, ISO 6207

Weight % Alloy 75 Tube
Ni Bal
Cr 18.9-21.0
Ti 0.2 - 0.6
C 0.08-0.15
Si 1.0 max
Cu 0.5 max
Fe 5.0 max
Mn 1.0 max

Availability
Nickel Alloy 75 (Nimonic 75®) is available in Drawn Tube. Nickel 75 tube is available in many sizes from stock, however there is a minimum production of 30m.

Nickel Alloy 75 Precision Seamless Tube is available the following size ranges.
Outside Diameter - 0.25mm (0.010") up to 16.00mm (0.625")
Wall - 0.05mm (0.002") up to 1.00mm (0.040")
Straight Lengths - 1.00mm (0.040") up to 5000.00mm (197")
Coils Lengths - 5 Metres to 15 Metres
Standard Tolerance- OD &ID +/-0.03mm (0.0012")
Wall +/- 10%
Tight Tolerance - OD&ID +/- 0.015mm (0.0006")
Wall +/-3%
Some thin wall tubes up to 25.40 mm (1.000") can be supplied.

Where specific properties or dimensions are required by a customer our technical and quality departments are available to define and produce suitable standards within exiting BS specifications. Contact our sales team on 01844 463103 or email sales@drawntube.com.

CONTACT OUR SALES TEAM TODAY ON 01844 463103 OR EMAIL sales@drawntube.com

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included here should be used as a guideline only. All specifications are subject to change without notice

Site Sponsored by AircraftmaterialsUK.com Ltd

Aluminium Seamless Tube - Aluminium Drawn Tube - Aluminium Precision Tube - Aluminium Aerospace Tube