Precision Tube Production - Alloys

We manufacture our products to your requirements so contact our sales team on 01844 463103 or email sales@drawntube.com. We specialise in small quantity and quick delivery.  

Alloys
Nickel Alloy 718 Seamless Tube (Inconel 718®) - Specifications UNS N07718,
Ni 52, Cr18, Mo3, Nb5, Ti1, Al0, Fe, AMS 5589, AMS 5590

Weight % Nickel 718 Tube
C 0.08
Mn 0.35
P 0.015
S 0.015
Si 0.35
Cr 17-21
Ni 50-55
Mo 2.8-3.30
Cb 4.75-5.50
Ta 0.05
Ti 0.65-1.15
Al 0.20-0.80
Co 1.0 max
B 0.006
Cu 0.30
Fe Rem

Availability
Nickel Alloy 718 (Inconel 718®) is available in Drawn Tube. Nickel 718 tube is available in many sizes from stock, however there is a minimum production of 30m.

Nickel Alloy 718 Precision Seamless Tube is available the following size ranges.
Outside Diameter - 0.25mm (0.010") up to 16.00mm (0.625")
Wall - 0.05mm (0.002") up to 1.00mm (0.040")
Straight Lengths - 1.00mm (0.040") up to 5000.00mm (197")
Coils Lengths - 5 Metres to 15 Metres
Standard Tolerance- OD &ID +/-0.03mm (0.0012")
Wall +/- 10%
Tight Tolerance - OD&ID +/- 0.015mm (0.0006")
Wall +/-3%
Some thin wall tubes up to 25.40 mm (1.000") can be supplied.

Where specific properties or dimensions are required by a customer our technical and quality departments are available to define and produce suitable standards within exiting BS specifications. Contact our sales team on 01844 463103 or email sales@drawntube.com.

CONTACT OUR SALES TEAM TODAY ON 01844 463103 OR EMAIL sales@drawntube.com

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included here should be used as a guideline only. All specifications are subject to change without notice

Site Sponsored by AircraftmaterialsUK.com Ltd

Aluminium Seamless Tube - Aluminium Drawn Tube - Aluminium Precision Tube - Aluminium Aerospace Tube