Precision Tube Production - Alloys

We manufacture our products to your requirements so contact our sales team on 01844 463103 or email sales@drawntube.com.

Alloys
Aluminium Tube Alloy 5083.

Weight % 5083
Al Bal
Si 0.40 max
Fe 0.40 max
Cu 0.10 max
Mn 0.40-1.0
Cr 0.05-0.25
Mg 4.0-4.90
Ti 0.15 max
Zn 0.25 max
Others 0.05 each / 0.15 max

Availability
Aluminium Alloy 5083 is available in Drawn Tube.

Alloy 5083 Tube is available the following size ranges.
Outside Diameter - 0.25mm (0.010") up to 16.00mm (0.625")
Wall - 0.05mm (0.002") up to 1.00mm (0.040")
Straight Lengths - 1.00mm (0.040") up to 5000.00mm (197")
Coils Lengths - 5 Metres to 15 Metres
Standard Tolerance- OD &ID +/-0.03mm (0.0012")
Wall +/- 10%
Tight Tolerance - OD&ID +/- 0.015mm (0.0006")
Wall +/-3%
Some thin wall tubes up to 25.40 mm (1.000") can be supplied.

Where specific properties or dimensions are required by a customer our technical and quality departments are available to define and produce suitable standards within exiting BS specifications. Contact our sales team on 01844 463103 or email sales@drawntube.com.

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice

Site Sponsored by AircraftmaterialsUK.com Ltd

Aluminium Seamless Tube - Aluminium Drawn Tube - Aluminium Precision Tube - Aluminium Aerospace Tube