Tel: +44 (0)1494 484844
Email sales@drawntube.com
Precision Tube Production - Alloys
We manufacture Cold Drawn Tubes to your requirements
Contact our sales team on Tel:
+44 (0)1494 484844 Email sales@drawntube.com
We specialise in small quantity and quick delivery.
Drawn Nickel Alloy tube,
Welded and drawn Nickel Alloy tube,
Alloys
Nickel Alloy 48 Seamless Tube (Nilo 48®)
- Specifications UNS K94800, Ni 48, Fe.
Weight % | Nickel 48 Tube |
Ni | 48 |
Cr | 0.25 max |
Mn | 0.80 max |
Si | 0.30 max |
C | 0.05 max |
Al | 0.10 max |
P | 0.025 max |
S | 0.025 max |
Fe | Bal |
Availability
Nickel Alloy 48 (Nilo 48®) is available in Drawn Tube. Nickel Alloy 48 tube is available in many sizes from stock, however there is a minimum production of 30m.
Nickel Alloy 48 Precision Seamless Tube is available the following size ranges.
Outside Diameter - 0.25mm (0.010") up to 16.00mm (0.625")
Wall - 0.05mm (0.002") up to 1.00mm (0.040")
Straight Lengths - 1.00mm (0.040") up to 5000.00mm (197")
Coils Lengths - 5 Metres to 15 Metres
Standard Tolerance- OD &ID +/-0.03mm (0.0012")
Wall +/- 10%
Tight Tolerance - OD&ID +/- 0.015mm (0.0006")
Wall +/-3%
Some thin wall tubes up to 25.40 mm (1.000") can be supplied.
Where specific properties or dimensions are required by a customer our technical and quality departments are available to define and produce suitable standards within exiting BS specifications.
Contact our sales team on Tel: +44 (0)1494 484844 Email sales@drawntube.com
CONTACT OUR SALES TEAM TODAY ON Tel: +44 (0)1494 484844 Email
sales@drawntube.com
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included here should be used as a guideline only. All specifications are subject to change without notice
Site Sponsored by AircraftmaterialsUK.com Ltd
Aluminium Seamless Tube - Aluminium Drawn Tube - Aluminium Precision Tube - Aluminium Aerospace Tube